POWER SUPPLIES & ACCESSORIES
REGULATED POWER SUPPLY - 13,8V 3AMP
Ideal for powering two-way radio equipment, cctv cameras, etc. This quality supply will provide a regulated 13,8 volt dc source at 3 amps continuously. Features a rocker-type on/off switch, and LED "on" indication. Other models are also available, with current ratings of up to 30Amps.
|PSUREG12V3A||3A (5A SURGE) MAINS PSU, 13.8V, REGULATED|
|PSUREG12V7A||7A (9A SURGE) MAINS PSU, 13.8V, REGULATED|
|PSUREG12V20A||20A (22A SURGE) MAINS PSU, 13.8V, REGULATED|
|PSUREG12V30A||30A (32A SURGE) MAINS PSU, 13.8V, REGULATED|
16 VOLT AC TRANSFORMERS
Ideal for powering alarm control panels, electric locks, and for providing the required input voltage to our selection of power supply modules.
|SEXFM16V1AMP||16 VOLT, 1 AMP PLUG-IN TRANSFORMER, STANDARD|
|SEXFM16VFUSED||16 VOLT, 1 AMP PLUG-IN TRANSFORMER, FUSED + MOV|
|SEXFM16V20VALED||16 VOLT, 1.25 AMP PLUG-IN TRANSFORMER, LED INDICATOR|
|SEXFM15VAC2AMP||CHASSIS MOUNT TRANSFORMER, 15-0-15 VOLTS, 30VA|
ECONO CHARGER MODULE
This charger module requires a 16v ac input, and then provides a charging output suited to alarm batteries. As can be seen, it has been designed to fit directly on to a 7AH, 12v battery.
DELUXE CHARGER MODULE
This module not only charges a battery, but also provides a regulated output for powering electronic devices. A bank of LED's provide visual indication as to status. Requires 16v transformer.
|SEBATCHARGERMIN||ECONO CHARGER MODULE|
|SEBATCHARGER||DELUXE CHARGER/PSU MODULE|
REGULATED POWER MODULE
This small module converts 16 v ac into a regulated 12v DC. It has a rated capacity of 1 A.
REGULATED "TEST-BENCH" MODULE
Need a power supply with adjustable voltage and variable current-limiting capability? This module, which requires a 16v AC input, will provide between 3 and 20v DC output. Current limiting dependant on size of transformer.
|RAPSU12V1AREG16V||REGULATED POWER MODULE|
|RAPSUVAR1AREG12V||TEST BENCH MODULE|
UNREGULATED AC/DC ADAPTORS
These low-cost, unregulated power supplies are available in two models: 0.5A and 1.0A surge. For continuous load, they should be rated at approximately 40% less - viz. 300mA and 600mA. Both models feature voltage adjustment, and the larger one also incorporates a mains LED indicator.
|RAPSUADA0500||0.5A AC/DC ADAPTOR|
|RAPSUADA1000||1.0A AC/DC ADAPTOR|
Pictured above are some of the batteries available from Commco. Please refer to our data-sheet for a comprehensive list.
|SEBAT12V12AH||RECHARGEABLE BATTERY, 12V @ 1,2 A/H|
|SEBAT12V07AH||RECHARGEABLE BATTERY, 12V @ 7,0 A/H|