SECURITY
DETECTION DEVICES
We stock a wide variety of detection devices, including:
PASSIVES, GLASS-BREAKS, SMOKE DETECTORS, MAGNETIC SWITCHES
Detectors are possibly the most vital component in a security system, and poor quality devices should be avoided at any cost. False alarms are frustrating, and if the alarm is being monitored, result in unnecessary expenditure. All of our products are selected for exceptional quality!
PARADOX 476 PRO PIR
Depicted
left, this PIR is imported from Canada, and to date we have yet to entertain a single
faulty device. It features a white light immune lens, insect trap, adjustable pulse-count,
high RFI & EMI immunity. This detector is being installed by some of South Africa's
most prominent security companies!
Auto Pulse Signal Processing with two programmable levels
Metal Shield
Automatic Temperature Compensation
110º Coverage - 12m x 12m
PARADOX DIGIGARD 70:
This dual-pyro digital detector is ideal
for applications where immunity to pets is a requirement. The Digigard 70 will provide a
high level of immunity to the detection of pets weighing up to 41Kg! As with all other
Paradox detectors, this one exhibits a very high level of both EMI and RFI immunity -
thanks to a protective metal shield.
| Sensor type | Dual element, infrared x 2 |
| Digital dual-opposed detection | YES |
| Signature analysis | YES |
| Digital dual-edge auto pulse processing | YES - two level |
| Digital shield | YES |
| Digital temperature compensation | YES |
| A/D type | Direct Digital Conversion |
| Resolution | 10 bit |
| Sampling rate | 15,6 kHz |
| Oversampling | 256X |
| S/N ratio | 60 dB |
| Dynamic range | 60 dB |
| Frequency response | 0,2 Hz to 7 kHz |
| DSP sampling rate | 61 Hz |
| Detection speed | 0,2 ~ 7m/sec. |
| Operating temperature range | -20 ~ +50 deg C |
| Power requirements | 9 ~ 16VDC 15mA max |
| RFI/EMI rejection | 60 - 70 V/m |
| Coverage | 11m x 90 deg. |
| Alarm indication | Red LED, 3s duration |
| Detect indication | Red LED, 0.25s duration |
| Protect indication | Green LED, 0.25s duration |
| Alarm output | N/C 28VDC @ 0.15A |
| Anti-tamper switch | N/C 28VDC @ 0.15A |
| Humidity | 95% maximum |
| Weight | 90g |
GLASS-BREAK:
PARADOX GLASSTREK
| Features | |
| Full audio and infrasonic spectrum analysis | |
| 7 frequency digital filters, digital amplifier gain and frequency fluctuation assessment | |
| Impact and shock wave analysis | |
| High-immunity to RFI and EMI signals | |
| Adjustable sensitivity: covers up to 9m (30ft) when set to high and up to 4.5m (15ft) when set to low | |
| TestTrek (459) used for testing available separately | |
| Anti-tamper switch | |
JIC SMOKE DETECTORS:
We
have been supplying these optical smoke detectors for over a decade. These detectors are
available in two models: stand-alone, and hard-wired. The hard-wired model is a 4-wire
device, making it ideal for addition to an existing alarm system. The battery model has a
built-in siren, and is powered from a single 9v PP3 battery - features low battery
warning.
ORDER CODES:
| SEDETPIRPARAPRO | PARADOX PRO PASSIVE INFRA-RED |
| SEDETPIRPARAPET | PARADOX DIGIGARD 70 PET IMMUNE DETECTOR |
| SEDETGBSGTREK | GLASSTREK DUAL FREQUENCY GLASS BREAK |
| SEDETSMK09VD | JIC636B STAND-ALONE SMOKE DETECTOR |
| SEDETSMK12VD | JIC636AR 12V SMOKE DETECTORc |
